Equipo

New production processes for stable printing with the right weight and shape;Not affected by the bumps of the base plate,Ensuring good filling through a single, straight-stream printing process;Through the pastSP80/60High-speed, many unprinted generics of the series,Quality printing achieved;Soft and clean because of the mild attraction of welding,Controlled the solidification of welders,Stabilize weldmarks,Achieving stable operation and higher quality printing;Advanced razor support,Keep the welds out of print. External.Reducing waste welding and preventing web blockage caused by bad welding.No damage to online version,It's common with plastic razors that can ensure welding,That's why we're going to have a stable and higher quality printing.Simple Operations.

Main specification
Brand	Panasonic
Model	SP18PL
Type 1	SMT Equipment
Type 2	Solder Paste Printing & Jetting
Type 3	Solder Paste Printer
Size	1100 * D1536 * 1430(MM)
Weight	1250 kg
Voltage	Single AC 200 V *2, 1.4 kVA *3
Rated power
Gas source	0.5 MPa,30 L /min (A.N.R.)
Operating System
Other

Parameters
Loop Time	8.0 s + Printing hours
Repeat location precision	±12.5 μm
Thread frame size	L736 * W736, L650 * W550 (Long) L550* W650(Governor),L600*W550 (Long)

Environmental conditions
Temperature	10℃~35℃※Temperature regulation device(Selected)Connect to20 ℃~30℃.
Humidity	25 % RH~75 % RH(But there's no sign)
Height	Altitude1 000 mBelow

Object Board
Base size	Min. 50 mm * 50 mm~ Max. 510 mm * 460 mm (We need a carrier according to the size of the base plate)
Baseboard thickness	0.3 mm~4.0 mm
Base mass	3㎏Below (Including load weight)
Flow	Left→Right or left←Right(They're all front-line benchmarks: Select Specifications)
Baseboard Fixed Mode	Mechanical pick-up or base plate sucking
Complement the scale of the base plate position	X, YOrientation±4 mm,θOrientation±0.7°
Gap between webboard and baseboard(Space)	-0.5 mm~3.0 mm