| Print response time | DH/DHU:6s+Printing hours(D/DU:8s+Printing hours) |
| Print panel size | Max:460*360mm,Min:50*50mm |
| Printing panel thickness | 0.5-4.0mm |
| Frame Size | 736mm*736mm,650*550,600*550 |
| Scratch type | Speed(Standard)Blade,A razor,Pointy razor,High-speed metal razor,A metal razor,A razor |
| Scratch length | L=480mm(Standard) |
| Scratch speed | 10mm/s ~ 250mm/s |
| Scratch pressure | High-speed razor:0.05Nto0.4N,Recommendations0.1Nto0.15N,Less than0.01NMaybe not getting a good print.A metal razor:0.15Nto0.2N) |
| Scratch | Switch between a single and a double razor by functional key |
| Webboard Graphics Position | Centre or Edge |
| Baseboard Fixed Mode | Tighten the edge(CLAMP)Standard,Vacuum(Options) |
| Webboard Position Precision | X-YOrientation±5mm,Angle direction±1.5degrees |
| Press interval | The surface below the netboard and the surface above the baseboard -0.5mmto+3mm |
| Demolition speed(Modalities:LIFT,A razor,HOLD,How much) | Initial Speed0.05mm/s,Final Speed0.1mm/sto5mm/s,0.1mm/sto5mm/s,0.1mm/sto5mm/s,0.1mm/sto10mm/s |
| Netboard Bottom Cleaning | Fuck(Clean Paper)Or wet(Alcohol＋Clean Paper) Groupable |
| When the netboard is clean | Standard26s,Depending on the size of the base plate and the type of clean-up set |
| Clean Paper Size | 1.5Inches(Ø38mmWithin),Long18000mm,width480mm |
| Vacuum device | Vacuum pump,Positive pressure(Standard),Vacuum(Options) |
| Working environment | Temperature:10℃to35℃,Humidity:35%to80% |
| Operating noise | 74dB |
